RCKT Style Pack of 10 RCKT1204M0PM,0.187 Thick Multi-Layer Coating 0.236 Corner Radius Round Sandvik Coromant COROMILL Carbide Milling Insert S40T Grade

Sandvik Coromant COROMILL Carbide Milling Insert, RCKT Style, Round, S40T Grade, Multi-Layer Coating, RCKT1204M0PM, 0.187' Thick, 0.236' Corner Radius (Pack of 10): Industrial & Scientific. Sandvik Coromant COROMILL Carbide Milling Insert, RCKT Style, Round, S40T Grade, Multi-Layer Coating, RCKT1204M0PM, 0.187" Thick, 0.236" Corner Radius (Pack of 10): Industrial & Scientific. Used with the Sandvik Coromant CoroMill 200 for medium-machining rough face milling and profiling on titanium and titanium alloys in difficult-to-average machining conditions 。 S40T grade is a medium temperature chemical vapor deposition (MTCVD) coating of titanium carbon nitride (TiCN), aluminum oxide (Al2O3), and titanium nitride (TiN) over carbide that provides good shock resistance without limiting wear resistance in demanding operations and maintains a strong edge that dulls slowly without breaking 。 Medium-machining (PM) chipbreaker to help prevent chip buildup 。 Round shape is the strongest of all shapes 。 Screw-style mounting for secure clamping 。 Maximum cut depth: 0.236 inches 。 The RCKT S40T carbide indexable milling insert has a round shape and a PM chipbreaker, and provides good shock resistance without limiting wear resistance for medium machining of titanium and titanium alloys in difficult-to-average machining conditions and in demanding operations with high vibrations. A combination of carbide and a thin multilayer coating of titanium carbon nitride (TiCN), aluminum oxide (Al2O3), and titanium nitride (TiN) applied through medium temperature chemical vapor deposition (MTCVD) maintains edge strength in demanding applications with high vibrations, and allows the cutting edge to dull slowly without breaking. MTCVD coatings are deposited at lower temperatures than chemical vapor deposition (CVD) coatings, resulting in the appearance of few or no cracks in the coating and providing improved toughness and smoothness compared to CVD coatings. 。 This positive insert is used with the CoroMill 200, a screw-style insert holding system for rough face milling and profiling with high chip-removal rates. The insert has a medium-machining PM chipbreaker. The round shape provides the strongest cutting edge of all shapes. Round inserts have a variable lead angle that allows for the production of thinner chips as the depth of cut is reduced, which improves productivity. The insert has a hole in the center, eight cutting edges, and a 7-degree clearance angle. 。 Milling inserts are coded according to their specific cutting and application capability (e.g., RCKT 12 04 M0-PM). Each section of the code represents details of the insert: shape, clearance angle, insert tolerances, combination of chipbreaker and clamp type, cutting edge length, insert thickness, M0 for metric inserts or 00 for U.S. version inserts, and chipbreaker style. Tolerance of the theoretical diameter of the insert ranges from + or - 0.002” to 0.004”. Insert thickness tolerance is + or - 0.001”. Insert shapes and sizes may have different inscribed circle (iC) measurements, which relate to ranges of cutting depths, speeds, lead angles, and feed rates. The iC is the largest circle that can be drawn within the edges of the insert shape. Generally, as the insert size and the iC become larger, the maximum cutting depth increases. Cutting depth influences the metal removal rate, the number of cuts, chip evacuation efficiency, and power required when using the insert. Indexable inserts are small cutting tools designed to remove material in external and internal cutting applications such as turning, milling, drilling, and grooving. They are held by an insert holder, have multiple cutting edges, and can be rotated when one edge wears down. Multiple inserts can accomplish a variety of cuts in one operation. An insert is either positive or negative, which refers to the rake or clearance angle at which the insert removes material.。 produces tools for turning, milling, and drilling. Headquartered in Sweden and represented in 130 countries, the company manufactures tools used throughout the metalworking field, including the automotive and aerospace, die and mold, and general engineering industries.。 Matching Inserts to Holders These inserts are used with the CoroMill 200, a screw-style insert holding system for rough face milling and profiling. When used with the RCKT insert, the CoroMill 200 has strong cutting edges and high chip-removal rates. It performs well in unstable environments and requires a rigid setup and secure workpiece clamping.。 。 。 。

RCKT Style Pack of 10 RCKT1204M0PM,0.187 Thick Multi-Layer Coating 0.236 Corner Radius Round Sandvik Coromant COROMILL Carbide Milling Insert S40T Grade
RCKT Style Pack of 10 RCKT1204M0PM,0.187 Thick Multi-Layer Coating 0.236 Corner Radius Round Sandvik Coromant COROMILL Carbide Milling Insert S40T Grade